13
Note
•
Only connect the product to a socket that has been
approved for the device.
•
The electrical socket must always be easily accessible.
•
When using a mult-socket power strip, make sure
that the sum power draw of all the connected devices
does not exceed its maximum throughput rating.
•
If you will not be using the product for a long period
of time, disconnect it from mains power.
Once the product has been connected to mains power,
initialisation takes place. The radio starts up.
To assist you in fi st-time setup of the radio, a
Setup
Wizard
is provided.
6.3 Initial setup
When it is first connected to the power supply, a list of
available languages for the menu is displayed. Proceed as
follows to set your preferred language.
Desired language, for
example German (German)
6.4 Setup wizard
Once a language has been set, the setup wizard offers to
assist you with fi rst-timesetup. Choose
YES
to start it or
NO
to skip:
YES/JA
NO/NEIN
Note – Starting up with or without the setup
wizard?
•
We recommend using the setup wizard (
YES
) to
quickly and easily confi gure the time, date, internet
connection, etc.
•
If you wish to skip setup with the setup wizard
anyway, choose
NO
. All of the settings configured
by the setup wizard can be configured or changed
individually in the System settings menu. Alternatively,
you may restart the setup wizard at any time.
•
Next, choose
YES
or
NO
to define whether the setup
wizard should start automatically next time the radio
is started up. You are in the
main menu
.
Date/ Time
12/24 hours format
• Auto update
• Update from DAB/ FM
If automatic time and date adjustment is
activated, the device receives time and date
information from the station over the FM/DAB/
DAB+ radio network. This is the best way to
ensure that the clock will run accurately and the
alarm will trigger at the correct time, even after
power outages.
• Update from Network
Choose this option to set the time and date
automatically from the internet. Set the timezone
of your current location and, if desired, turn (ON)
automatic adjustment between summer time and
winter time.”
• No Update
The time and date (
DD-MM-YYYY
) must be set
manually; no automatic calibration takes place.
