Resetting the 2.4GHz Wireless Controller to default:
To Reset the 2.4GHz Wireless Controller back to its default settings:
1. Press the MACRO button to turn the programming function. The MACRO led will flash
indicating that the programming function is active.
2. Press the button you wish to reset, the MACRO led will stop flashing and become illuminated.
3. Press the MACRO button to turn the programming function OFF. The MACRO led will be
turn off.
Note:
you can reset all programming buttons by disconnecting and reconnecting the Wireless
Receiver from your game console. Once reset, the 2.4GHz Wireless Controller will lose all
button-programmed information and all relocated buttons will be reset.
CAUTION:
- Use this controller only as instructed. Read all instructions before operating controller.
- To prevent fire or shock hazard, do not expose this controller to rain or moisture.
- Do not disassemble. Refer to qualified personnel only.
- This controller should only be operated from the power source indicated on the controller.
If you are not sure of the type of electrical power supplied to your home, contact your local
power company.
- Never push objects of any kind, other than authorized items, into the product as they may
touch dangerous voltage points or short out parts that could result in fire or electrical shock.
- The controller's vibration function can aggravate injuries. Do not use the controller if you
have any injuries or ailments in your hands or arms.
XBOX
®
is registered trademark of Microsoft Corporation. This product is not sponsored,
endorsed or approved by Microsoft.
See www.hama.com for declaration of conformity with R&TTE Directive 99/5/EC.
Program (“P”) Button
This button allows you to program a complicated move requiring many buttons and recall the
move by pushing a single button. See the “Program Function” section of this instruction
manual.
Auto Scan Button
This button allows you to find a suitable frequency point by pressing the auto scan button.
Use this if you have no connection to the receiver after five minutes. When pressing auto scan
button on the receiver, the signal led will blink, and then becomes illuminated to indicate the
right connection between controller and receiver.
What is button programmability?
Button programmability allows you to program one button in place of another (button
relocation) or program a series of button and D-Pad position (up to 15) into one button.
For example, you can program the A Button on your XBOX
®
Advanced Controller to perform the
function of the X Button. You can even program advanced macros such as pressing the
D-Pad down, diagonally down, forward and hitting the A button to work as single button.
When using button programmability, the analog button option is not taken into account and
every button press is registered to the pad as 100%.
Advanced Programming Techniques:
In some games the ability to implement special moves depends on the timing. The time duration
of pressing the button, and the time interval during which the button is released before the next
button is pressed, are sometimes two crucial factors determining the special moves which can
be implemented successfully. There may be times when it is necessary to set a delay between
commands when setting a Macro. To record a delay, press the BACK button. If a longer delay is
necessary, press the BACK button as many times as needed. This will vary by game.
Note:
The 2.4GHz Wireless Receiver must be plugged into the XBOX
®
console to enable button
and programmability, and will not function in game play when it is being programmed.
How to Program the 2.4GHz Wireless Controller:
1. Press the MACRO button until the MACRO led is flashing to indicate that the programming
function is active.
2. Select the button (Including White, Black, L-Stick-button, R-Stick-button) to be programmed
by pressing that button until the MACRO led stops flashing and becomes illuminated.
3. Press the desired button (Including A, B, X, Y, R-Trigger, L-Trigger, L-Stick-button,
R-Stick-button) or D-Pad position(s) to be programmed into the selected button above.
Each button pressed during this step will be acknowledged by one blink on the MACRO led.
Note:
if the maximum number of buttons are pressed for programming (15), the 2.4GHz
Wireless Controller will not accept further input and The MACRO led will be turn off.
4. Press the MACRO button to turn the programming function OFF when the desired button
assignments are finished. The MACRO led will be turn off.
5. Repeat the procedures above to program another button.
8
9
e
00034378bda 03.07.2006 13:52 Uhr Seite 9
