3. Wait for a couple of minutes while the system opens the fire dampers.
Once the fire dampers are open, the system continues working normally.
7.3.4 Testing the system
Here you verify that the system is working as it should. You can test the whole system or an alarm group (zone).
1. Log in as Installer. For instructions, see
.
2. Select the zone settings icon.
3. To test the whole system manually, in the Zone settings view, at the lower part of the view, select "Test all".
Halton Safe Management 2.0 (SM2) - Installation, commissioning, operating, and maintenance guide
53
1.0
All rights reserved ©Halton
