4
Capture Ray
TM
Operation & Maintenance & Service Manual
CJUV/0
120
09/re
v1/EN
FIGURE 2
SPLICE STRIP / U-CHANNEL ASSEMBLIES
A
B
B
A
C
D
D
C
Hoods end to end
Hoods back to back
= U-Channel
Holds two end panels
together
Pry U-Channel apart
at one end and insert
over the end panels
Hammer channel on
starting from one end
and going to the other
A
= Splice Strip
Insert splice strip over
bottom front edge first
then over top front of
the hood
Secure to top of the hood
by welding or sheet metal
screws (supply plenum only)
B
Secure to top of the hood
by welding
then over top sides
bottom sides first
Insert splice strip over
= Splice Strip
= U-Channel
Holds two backs together
Clamp the two backs
together
Slide U-Channel up over the
backs, and secure with
sheet metal screws
D
C