Installation
Carefully pull out the battery security tab.
Clean the surface you will attach the sensor to with IPA -solvent
(isopropyl alcohol).
Security tab
Remo
ve
Tab
Please make sure the Thingsee gateway device is installed before you
install the sensors.
To identify the sensor, read the QR code on the front of the device
with a QR code reader or Thingsee installation application on your
mobile device.
Identifying the device is not necessary, but it will help you keep track
of your IoT installation and help Haltian support to solve possible
issues.
D E V I C E
D E V I C E
E V E N T S
T O P O L O G Y
D E V I C E
D E V I C E
E V E N T S
T O P O L O G Y
BEAM
BIN VERSION:
3.4.37.0
SW VERSION:
2018.07.02.2_ts_pinsp34
BATT LEVEL: 100%
DESCRIPTION: Room1
TUID: TSPR042O02500875
I N F O
BEAM
16/11/2018 09:15:57
16/11/2018 09:14:57
16/11/2018 09:13:57
16/11/2018 09:12:57
16/11/2018 09:11:57
QR code
Note:
Make sure the sensor is installed max. 20 meters form the next sensor or
gateway. This is to ensure full coverage mesh network between the sensors and
the gateway.
