halstrup-walcher P26, Instructions Manual

Page: 15 / 24

P26 Instruction Manual
15
7.2.2 Volumetric flow
This menu item is used to adjust the volumetric flow display values.
The following sub-menu items are available:
 Value
 Unit
7.2.2.1 Value
This is used to set the volumetric flow value displayed at the maximum scaled pressure. 0 is
always used as the lower scale value on the volumetric flow display (root-extracted measured
value). The maximum pressure is the larger of the two scale values, which is used as a basic
calculation.
7.2.2.2 Unit
You can use this menu item to select the unit of the volumetric flow value. The following
volumetric flow units can be selected: m3/s, m3/h
7.2.3 Mass flow
This menu item is used to adjust the mass flow display values.
The following sub-menu items are available:
 Value
 Unit
7.2.3.1 Value
This is used to set the mass flow value displayed at the maximum scaled pressure. 0 is always
used as the lower scale value on the mass flow display (root-extracted measured value). The
maximum pressure is the larger of the two scale values, which is used as a basic calculation.
7.2.3.2 Unit
You can use this menu item to select the mass flow unit. The following mass flow units can be
selected: kg/s, kg/min, kg/h
7.2.4 Flow rate
This menu item is used to adjust the flow rate display values.
The following sub-menu items are available:
 Value
 Unit
7.2.4.1 Value
This is used to set the flow rate value displayed at the maximum scaled pressure. 0 is always
used as the lower scale value on the flow rate display (root-extracted measured value). The
maximum pressure is the larger of the two scale values, which is used as a basic calculation.