Page 7
1000003018 (Rev. D - 09/18)
HTHBHVR8_2A HTHBHVR8-NF_2A
`
Service: Inspection/Replacement
• Inspect Bottle Filler and Cooler twice each year for proper operation and performance.
• Inspection of the unit will require disconnecting electrical supply, removal of panels, etc. and reassembly and return to service practices.
1. Lower Front Panel
: To access the refrigeration system and plumbing connections, remove four (4) screws from bottom of cooler to remove the
lower front panel.
Replacement Parts: Water Filter Parts List
Replacement Parts
Part No.
55898C
55898C_12PK
98546C
98549C
98552C
98631C
1000004771
98668C
98999C
99000C
1000001907
99002C
99003C
99004C
Description
Filter-WaterSentry Plus
Filter - WaterSentry Plus (12 Pack)
Kit - Aerator Replacement
Kit - Hardware & Waterway Parts
Kit - Retro Filter Mounting
Kit - Electrical Package 220V
Kit - Solenoid Valve Replacement 220V
Kit - Filter Mounting Cover
Kit - Drain Pad
Kit - Button Assembly
Kit - Top Cover Replacement
Kit - Gasket VR BF Tower/Basin
Kit - Reset Switch
Kit - Micro Switch
Item No.
1
2
3
Part No.
55898C
98926C
51469C
Description
Filter Assy-3000 Gal.
Kit-Filter Head Fitting Includes John
Guest Fittings & 3/8” Elbow Fitting
Assy-Filter & Bracket includes Filter
Head/Mounting Bracket/John Guest
Fittings/Screws
For Replacement Parts, contact your local distributor or visit our website www.HalseyTaylor.com
2. Bottle Filler Removal: Loosen but DO NOT remove the two (2) Mounting Screws from
the sides of the Bottle Filler. Remove the two (2) Pinned Torx Head Screws from the Top Cover &
remove the Top Cover. The Bottle Filler may then be lifted up and off the Water Cooler
(The water line and Remote Reset Button Wires will still be connected from the Water Cooler to
the Bottle Filler.).
3. Bubbler
: To remove the bubbler, first disconnect the electrical supply. The underside of the
bubbler can be reached through the underside of the front section. Remove the cover and
internal panel by removing the retaining screws. To remove the bubbler, remove the tubing from
the quick connect fitting and loosen the bubbler nipple by turning counter-clockwise. Do Not
Overtighten. After servicing, replace internal panel and cover and secure with retaining screws.
Then replace the lower front panel and secure with four (4) screws.
4. Cleaning Strainer on Solenoid Valve: To clean the strainer, unscrew the cap of the solenoid
valve. Remove screen and rinse thoroughly with water. Insert screen back into solenoid valve
and screw cap on. Make sure the o-ring is placed properly.
2222 Camden Court – Oak Brook, IL 60523 U.S.A – 630.574.8484
Bubbler
56305C
Bubbler Nipple
Basin
56305C
