97715C (Rev. B - 5/04)
HRFGEBP_A, HRFGSBP_A
PART NO.
ITEM NO.
PARTS LIST
Drain
Drain-Aztec Gold
Scr, 10-24 x 1/2 PH TR HD-Z
Nut-reg. retain 1-1/8 - 24
Bottom - Plate (HRFG-E)
Bottom - Plate (HRFG-S)
Strainer-Beehive
Strainer-Beehive Aztec Gold
Hex - Nut
Ferrule-Tailpipe
Ferrule-Tailpipe Aztec Gold
Push Button
Push Button-Aztec Gold
Push Button Sleeve
Push Button Sleeve-Aztec Gold
Regulator Holder
Bubbler Assy
Bubbler Assy-Aztec Gold
Push Button - Extension
Fountain - Galaxy Gray (HRFG-E)
Fountain - Galaxy Gray (HRFG-S)
Fountain - Golden Sand (HRFG-E)
Fountain - Golden Sand (HRFG-S)
Fountain - Black (HRFG-E)
Fountain - Black (HRFG-S)
Regulator
Screw #6-32 x .31" Set
Strainer
Panel - Back Galaxy Gray (E)
Panel - Back Galaxy Gray (S)
Panel - Back Black (E)
Panel - Back Black (S)
Panel - Back Golden Sand (E)
Panel - Back Golden Sand (S)
Panel - Back Stainless Steel(S)
Panel - Back Stainless Steel(E)
Bubbler Locknut
Gasket - Black
Insert - Threaded
Nipple Assembly
Wall Plate Assy HRF-SBP
Wall Plate Assy HRF-EBP
Nut - Regulator Mounting
Screw #6-32 x .12" Set
Poly Tubing (Cut To Length)
LK464
LK464AG
112627543890
15005C
27658C
27201C
40038C
45364C
40045C
40619C
45360C
45662C
45408C
45738C
45750C
50986C
51544C
45396C
56087C
56053C
55969C
56057C
55970C
56056C
56025C
61313C
70022C
55996C
56028C
56031C
56027C
56030C
56029C
56032C
23187C
23189C
70012C
100322740560
75554C
15029C
28158C
28170C
45736C
70023C
56092C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
DESCRIPTION
Orifice Assy:
Mineral deposits on orifice can cause water flow to spurt or not regulate. Mineral deposits may be removed from the
orifice with a small round file not over 1/8" diameter or small diameter wire.
CAUTION: DO NOT
file or cut orifice material.
Stream Regulator:
If orifice is free of material deposits, regulate flow as in instructions on page 3(Step 7) or page 5(Step 9). If
replacement is necessary, see parts list for correct regulator part number.
Actuation of Quick Connect Water Fittings:
Cooler is provided with lead-free connectors which utilize an o-ring water seal. To
remove tubing from the fitting, relieve water pressure, push in on the gray collar while pulling on the tubing.(See Figure 6, Page 7). To
insert tubing, push tube straight into fitting until it reaches a positive stop, approximately 3/4".
CAUTION: Cleaning of Aztec Gold Models requires special care.
Outer surfaces must be cleaned with detergent or mixture of
vinegar and water only, rinsed and wiped dry. Abrasive and acidic cleaners may eventually damage the Aztec Gold finish.
TROUBLE SHOOTING & MAINTENANCE
FOR PARTS, CONTACT YOUR LOCAL DISTRIBUTOR OR CALL 1.800.323.0620
2222 CAMDEN COURT
OAK BROOK, IL 60523
630.574.3500
PRINTED IN U.S.A.
PAGE 8
