Copyright © 2023 Halogen Systems, Inc. All rights reserved worldwide.
4
WHAT’S IN THE BOX
Open the two boxes to show the MP5 sensor and the D20 display/controller:
Item
Description
MP5 sensor
D20 display/controller
Note:
product technical details be found in the
at the end of this guide.
Unpack the cardboard box protection liners and carefully remove its contents. The boxes should contain the
following items:
D20 display/controller
MP5 sensor
▪
D20 display/controller
▪
Mounting tabs for wall mount
▪
Strain relief for 4-20mA cable
▪
This installation guide
▪
MP5 sensor for FC installation
▪
Flow cell with push-to-connect
tubing fittings
▪
3/8" tubing (push-to-connect)
adapters
If in the unlikely event that something is missing, contact Halogen Systems before proceeding with the
installation.
W
HAT YOU’LL
NEED
You’ll need these tools and materials to install the
display/controller and the sensor:
▪
#2 Phillips and flathead screwdrivers
▪
Screws that are appropriate for mounting the products on a wall or pipe
Depending on how the products will be installed, you may need other tools not described in this guide.
Before proceeding to the next step
…
1.
Put away the empty boxes and packing material for safe keeping.
2.
Determine the best, safest location for mounting the display/controller.
3.
Gather all
the tools you’ll need for the site installation.
4.
Don’t forget to use our
to check off tasks during installation.