Copyright © 2023 Halogen Systems, Inc. All rights reserved worldwide.
i
Halogen D20 Display/Controller and MP5 Sensor Installation Guide
Copyright © 2023 Halogen Systems, Inc. All rights reserved worldwide.
Revision 1.00
PRODUCT SPECIFICATIONS
All specifications and descriptions contained in this document are verified to be accurate at the time of printing. However, because continuous
improvement is a goal at Halogen Systems, we reserve the right to make product modifications at any time. Revised editions are found on the
manufacturer’s website:
. To communicate any inaccuracies or omissions in this manual, send an e-mail to
SAFETY INFORMATION
This guide contains important instructions for the Halogen D20
™
and the Halogen MP5
™
that should be used for installation and basic setup.
The manufacturer is not responsible for any damages due to misapplication or misuse of this product, including, without limitation, direct, incidental, and
consequential damages, and disclaims such damages to the full extent permitted under applicable law. The user is solely responsible for identifying critical
application risks and installing appropriate mechanisms to protect processes during a possible equipment malfunction.
Please read this entire manual before unpacking, setting up, or operating this equipment. Pay attention to all danger and caution statements. Failure to do
so could result in serious injury to the operator or damage to the equipment. Make sure that the protection provided by this equipment is not impaired.
Do not use or install this equipment in any manner other than that specified in this manual.
PRECAUTIONARY LABELS
Read all labels and tags attached to the instrument. Personal injury or damage to the instrument could occur if not observed. A symbol on the instrument
is referenced in the manual with a precautionary statement.
Safety alert:
Indicates a hazardous situation that could result in injury or death. If on the instrument, refer to
the instruction manual for operation or safety information.
Risk of electric shock:
Indicates components or a procedure that risks electric shock, electrocution, or injury.
Electrostatic discharge:
Indicates the presence of devices sensitive to electrostatic discharge (ESD) requiring
that care must be taken to prevent damage to the equipment.
Disposal:
Electrical equipment may not be disposed of in European domestic or public disposal systems.
Return old (or end-of-life) equipment to the manufacturer for disposal at no charge.
TRADEMARKS
The unauthorized use of any trademark displayed in this document or on the product is strictly prohibited. D20 and MP5 are trademarks of Halogen
Systems, Inc. Multiple US and worldwide patents have been granted to Halogen Systems, Inc. for its unique features of Chlorine measurement system
sensor systems.
Gems is a trademark of Gems Sensors, Inc. and Modbus is a registered trademark of Schneider Electric USA, Inc. All other trademarks contained in this
document are the property of their respective owners, and any use does not imply sponsorship or endorsement of their products or services by Halogen
Systems, Inc.
COMPLIANCE AND CERTIFICATION
CAUTION:
This equipment is not intended for use in residential environments and may not provide adequate
protection to radio reception in such environments.
Canadian Radio Interference-Causing Equipment Regulation, ICES-003, Class A
This Class A digital apparatus meets all Canadian interference-causing equipment regulations requirements.
Cet appareil numérique de classe A répond à toutes les exigences de la réglementation Canadienne sur les équipements provoquant des interferences.
FCC Part 15, Class A Limits
Supporting test records reside with the manufacturer. The device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1.
The equipment may not cause harmful interference.
2.
The equipment must accept any interference received, including interference that may cause undesired operation.