background image

Page 4

 

 

 
 
 
 

 

 

 

 

 
 
 

 
 

 

Specifi cations 

TABLE 1

Minimum/Maximum Operating Pressure

20-125 psi

Minimum/Maximum Operating Temperature

40°F (4°C)  -110°F (38°C)

Current Draw & Voltage

0.5 Amperes 110 Volts Other options available

Table 2 contains a summary of specifi cations for the control valve and bypass valve.

Quick Reference Valve Specifi cations 

TABLE 2

Max Service fl owrate (include bypass)

27 gpm (102.2 lpm) @ 15 psig (103 kPa) drop 

Max Backwash fl owrate (includes bypass)

27 gpm (102.2 lpm) @ 25 psig (172 kPa) drop

Regenerant Refi ll Rate

.5 gpm (1.9 lpm) 

Inlet/Outlet Fitting Options

(a)  1” NPT elbow which  has a unique drill out feature to allow a 1/4” NPT connec-
tions to the inlet and/or outlet
(b)  3/4” & 1” PVC solvent weld fi tting
(c)  1” straight brass sweat fi tting
(d)  3/4” straight brass sweat fi tting 

Distributor Tube Opening

1.05” Diameter (3/4” U.S. PVC Pipe Size

Tank Thread

2-1/2” - 8 NPSM

Control Valve Weight

4.5 lbs 2.0 kg

PC Board Memory

Nonvolatile EEPROM
(Electronically erasable programmable read only memory)

Compatible with regenerants/chemicals

Sodium chloride, potassium chloride, potassium permanganate, sodium bisulfi te, 
sodium hydroxide, hydrochloric acid, chlorine and chloramines

Summary of Contents for CK10




















Reviews: