20
6.
Below is an example of both positions.
7.
Replace the cap back on the regulator.
8.
Next you will remove the grates, burners and burner caps from the cooktop to
access the orifices.
9.
You will need a 7mm wrench to remove the orifices. Each orifice can be accessed
easily - the larger burner orifice is located on the burner wall.
10.
Remove all NG orifices and place in a separate bag and store with your manual
for future use.
11.
Take the LPG orifices provided and install them as shown below – each orifice is
stamped with the size. You may require a magnifying glass to see this stamping.
See below for rating of orifice for each model
LPG Left
Front
Left
Rear
Middle/Center
Right Front
Right Rear
HGC2401ST
.94 mm
.75 mm
N/A
1.25 mm
.57 mm
HGC3001ST
.96 mm
.75 mm
1.25 mm
.96 mm
.57 mm
HGC3601ST
.96 mm
.75 mm
1.25 mm
.96 mm
.51 mm
Orifice Locations
Summary of Contents for HGC2401ST
