Hallman HGC2401ST, Installation And Owner'S Manual

Page: 21 / 41

17
and “flame cap” are correctly positioned and that there are no spider webs in
the burner cavity.
CLEANING THE COOKTOP
Always keep cleaning materials and chemicals in a safe place and away from children.
Know what you are using. Make sure all parts of the cooktop are COOL before cleaning.
Be sure to replace the parts correctly.
Knobs
Wash in a water solution with a mild detergent mix. Do not use an abrasive cleaner or any
abrasive action.
Grates and burner caps
Clean burner grates in a water solution with a mild detergent mix.
Burners Heads
The holes in the burners of your cooktop MUST be kept clean at all times for proper
ignition and a complete, even flame. Remove any food from between the burner slots
using a small nonabrasive brush like a soft toothbrush and afterwards wipe using a damp
cloth. To remove deposits from the burner cavities, remove the cap and separate the two
parts. Clean the burner holes routinely with a small gauge wire or needle (especially after
bad spillovers which could clog these holes). After cleaning, put the two parts back
together and return them correctly to their position, making sure they are seated and level.
DO NOT put burner units in the dishwasher.
Stainless Steel Top
Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water
and a cloth. Do not use cleaners with high concentrations of chlorides or chlorines.
Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are especially
made for cleaning stainless steel.
Repair Parts
When repair parts are needed, contact the dealer from whom the cooktop was
purchased. In case your cooktop was purchased from a source other than an
appliance dealer, you may prefer to contact the manufacturer at the address shown in
this manual.