Hallman HGC2401ST, Installation And Owner'S Manual

Page: 16 / 41

12

Maximum depth of cabinets installed above the cooking top to be no more
13 inches deep.

Seal the cut surfaces with a suitable heat-resistant sealant to avoid swelling
caused by moisture.

If during installation the seal around the frame does not sit flush within the
countertop at the corners, the corner radius (maximum 3/16" (4 mm) can be
carefully filed down to fit. The cooktop has a seal underneath to keep it
securely in position and water/debris from getting underneath cooktop base.

Use the clips that are included to hold the base securely in place.

Disconnect the cooktop from electrical supply if connected before attempting to
service or move it.
Installing the cooktop

Remove the cooktop from its package and set aside all burners, burner caps
and grates.

Lower it centrally into the cut-out. When
doing so, make sure that the seal under the
cooktop sits flush with the countertop on all
sides. This is important to ensure an effective
seal.
Do not use sealant.

Use the 4 supplied clips to secure the base with
the underside of the counter top.

Take each clip and slide it into each slot on the cooktop base, then loosely
fasten the clips to the cooktop with a Philips screwdriver with the screws
provided. Once this is done you’re
now ready to secure the cooktop to
the underside of the cabinet.