Hall Technologies February 03, 2023
Page 10 of 52
Setup
INSTALLATION
To install and connect the HT-CAM-4K-EPTZ camera, do the following:
1.
Step One
Mark the mounting holes on the wall and drill the appropriate size hole to mount either the
included M6 swelling bolts or drywall anchors (not included).
2.
Step Two
Insert the limiting post onto the top of the wall mount.
3.
Step Three
Secure the wall mount to the wall using the included M6 nuts and washers, or, if using drywall
anchors in step one, secure using the drywall anchor screws.
4.
Step Four
Mount the camera to the top of the wall mount and secure with the included camera bolt.