UH18
6
© Copyright 2019 Hall Research, Inc.
4.0 Connector and Indicator Functions
4.1 UH18-S (front and back)
IR In
IR Out
Connect the IR Detector Cable to
IR In
port
Connect the IR Emitter Cable to
IR Out
port
USB Hub
Connect any USB 2.0 Local Devices
USB 2.0
Connect to PC with USB 2.0 TypeA to B Cable
Long Reach
Mode
Enable to Extend 1080p video up to 150m
Disable to Extend 4K video up to 100m
Local EDID
ON – Use the EDID of display connected on sender
OFF – Used the EDID of the display connected on receiver
HDMI
PWR LED
ON when HDMI Source is detected
ON when power applied to sender
24V
Connect Supplied 24V DC External Power Supply
FW
Firmware Update
RS-232
Connect 3 Pin Phoenix RS-232 Cable
HDBT Out
Use CAT5e/6 UTP Cable to connect Sender and Receiver
HDMI Input
Connect to HDMI Source using an HDMI cable
HDMI Output
Connect Sink (Display) using HDMI cable
