Dd
HDMI + USB + LAN over UTP Exender with HDBaseT & POC
© Copyright 2020 Hall Research, Inc.
9
5.3 IR Extension
The bi-directional IR extension is pass through. Connect the IR Detector and Emitter
cables to both the Sender and Receiver to extend IR in both directions.
Emitter
Tip = Anode (+) / SIG
Ring = Cathode (-) / GND
Sleeve = GND
Detector
Tip = +5 VDC / VCC
Ring = SIG
Sleeve = GND
Note:
This image is only representative, the actual cable may look different
5.4 RS-232 Extension
The RS-232 Extension in UH18 is Pass-through. The
baud rate settings of the serial device connected at the
Sender must match with the serial device connected at
the Receiver End for successful full-duplex
communication.
