background image

 

 

 Multi Input Digital Scaler with Audio 

1

TRADEMARKS USED IN THIS MANUAL 

 

Hall Research, HR, and the 

  logo are trademarks of Hall Research Inc. 

 

Any other trademarks mentioned in this manual are acknowledged to be the property of the 
trademark owners.

  

 

FEDERAL COMMUNICATIONS COMMISSION 

RADIO FREQUENCY INTERFERENCE STATEMENT 

This equipment generates, uses, and can radiate radio frequency energy and if not 
installed and used properly, that is, in strict accordance with the manufacturer’s 
instructions, may cause interference to radio communication.  It has been designed to 
comply with the limits for a Class A computing device in accordance with the 
specifications in Subpart B of Part 15 of FCC rules, which are designed to provide 
reasonable protection against such interference when the equipment is operated in a 
commercial environment.  Operation of this equipment in a residential area is likely to 
cause interference, in which case the user at there own expense will be required to take 
whatever measures may be necessary to correct the interference. 
Changes or modifications not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment. 

This digital apparatus does not exceed the Class A limits for radio noise emission from 

digital apparatus set out in the Radio Interference Regulation of the Canadian 

Department of Communications.

  

 

 

 

 

 

Summary of Contents for SC-1080H

























Reviews: