STABILITY MODULE
INSTALLATION/SERVICE
GUIDE (L31288W)
TM
Plumbing Schematic
2M Stability Module Application
Bottom View Shown. Haldex FFABS is shown, a two- or six-port ABS Relay Valve may also be used.
The Stability Module and ABS valves are plumbed into the reservoir.
The air line between Port 2 of the Stability Module and Port 4 of the ABS valves should be no longer
than 80” (2 m) in total length for a 3/8 inch tube.
The ABS configuration may be either 2S/2M Side-By-Side, 4S/2M Side-By-Side (Recommended) or
4S/2M Axle-By-Axle (Not Recommended).
CAN connection and speed sensors not shown in plumbing schematics.
Page 14
Bottom View of Reservoir and Valves
