HDV R 14 1.1
Due to constant technological advancement, the manufacturer may modify the content of this manual without prior notice.
6
4 Preliminary operations
Make sure the following parts are in the box:
A HDV R 14 model
A battery
A battery charger
A salt water ballast
This instruction manual
4.1
Opening the battery compartment
Stand the HDV upright on a flat surface resting it on the flow conveyor (5).
Turn the front hand wheel (9) counter-clockwise.
Rotating the hand wheel, the shell (8)
(see fig. 1) start to lift. Continue rotating until the shell detaches from the engine body.
Remove the shell.
Note: always rinse, accurately clean and dry the HDV before opening it. Sand or mud can
enter the OR housing (19) (see fig. 6) and jeopardize the perfect hermetic seal.
4.2
Extracting the battery
Figure 2
Figure 3
