Halcyon Flare, Owner'S Manual

Page: 9 / 12

9
Traveling with your Flare™/Focus™
During travel you should loosen the battery from the tether base so the light can’t be ignited accidently. The light
is very robust but care should be taken during transport by packing in a way that protects the light from shock
or excess abuse. The Flare
™
/Focus
™
battery meets all current flying requirements regarding lithium content. The
complete light also weighs less than 3 pounds (2.95lb/1.3kg) making it a breeze to carry or check for all your diving
trips.
Care and Maintenance
• Your Flare
™
/Focus
™
light is extremely resilient but should be treated with care in order to ensure maximum
lifespan.
• You should not run this light out of the water for any extended period.
• You should clean your light with fresh water after each dive, and keep it clean.
• Keep O-rings free of dirt and lightly lubricated.
• Do not try to open the light head or battery pack. This will void your warranty.
Troubleshooting:
1. My light doesn’t turn on.
Ensure the battery is fully screwed into the tether base and verify the battery if fully charged.
2. My battery doesn’t seem to have a full charge.
Ensure the charger is operating by first plugging into a power source. You should see a green light on the wall
plug. Then screw the battery into the charger base. If the battery is discharged then you should see a red light
which shows until charged before changing to green. If the battery is discharged and the light remains green
then your charger should be evaluated by a Halcyon repair technician.
3. My Focus
™
knob feels loose or the focus seems off.
Verify the set screw on the knob is secure. The focus beam can be reset by adjusting the location of this knob
relative to the winding spindle.