Halcyon Flare, Owner'S Manual

Page: 8 / 12

8
the intensity of light output. The Flare
™
and Focus
™
lights both maintain two power settings. The low power setting
is extremely efficient, burning only about a third of one amp or roughly 10% of a typical HID bulb. The high power
setting draws less than one amp, or less than half a typical HID bulb, while producing more light output.
Halcyon Focus
™
Halcyon Flare
™
Weight
Light Head 1.3lb/.59kg Light Head 1.2lb/.54kg
Complete Light 2.95lb/1.3kg Complete Light 2.94lb/1.3kg
High-Power Setting
Lux Output
1 meter 39,300 1 meter 11,500
3 meters 4,100 3 meters 1,700
5 meters 1,550 5 meters 650
Runtime
5amp LiOn 300+ min 5amp LiOn 300+ min
9amp NiMH 600+ min 9amp NiMH 500+ min
13amp NiMH 900+ min 13amp NiMH 800+ min
Low-Power Setting
Lux Output
1 meter 17,600 1 meter 5,900
3 meters 1,900 3 meters 750
5 meters 730 5 meters 350
Runtime
5amp LiOn 900+min 5amp LiOn 900+ min
9amp NiMH 1,300+ min 9amp NiMH 1,500+ min
13amp NiMH 2,000+ min 13amp NiMH 2,000+ min
Operational Limits
When the battery capacity runs low your Halcyon Flare
™
/Focus
™
lights will automatically switch to low light output
to insure additional operational time. This switch occurs around 9.8 volts. The lights will automatically shut off
when they reach 9 volts. The Halcyon Flare
™
/Focus
™
lights also maintain a protection against overheating and will
shut down when internal temperatures exceed operationally safe parameters. The light will operate again when
the temperature returns to a safe range. The Halcyon Flare
™
/Focus
™
design has been tested for watertight integrity
to a depth of 300m.
WARNING: You should not operate your Flare
™
/Focus
™
out of the water for extended periods, as
this will build excess heat and potentially damage your light.