Halcro SSP220 Owner'S Manual Download Page 87

Page: 87 / 87

This product is manufactured by Halcro Pty Ltd Australia trading as Halcro and Halcro Audio
(USA) Inc.

Halcro Logic is a trademark of Extraordinary Technology (Hi-Fi) Pty Ltd, Australia.

Dolby, the Double-D symbol, Dolby digital, and Pro Logic are trademarks of Dolby
Laboratories Licensing Corporation.

DTS is a trademark of Digital Theater Systems. Inc. or DTS (BVI) Limited.

THX and Ultra2 are trademarks of THX Ltd. THX may be registered in some jurisdictions.
Surround EX is a trademark of Dolby Laboratories. Used with permission

HDMI™, the HDMI™ logo, and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI™ Licensing LLC.

Halcro Logic SSP180 & SSP220 Owner’s Manual Revision 1.8, © Halcro 2009

All manuals and user guides at all-guides.com

Summary of Contents for SSP220
























































































Search results

Summary of Contents for SSP220

Reviews:

Related manuals for SSP220

Brands by name

Popular brands

Halcro SSP220, Owner'S Manual

Search results

Summary of Contents for SSP220

Reviews:

Related manuals for SSP220

Brands by name

Popular brands