3
4
Check to make sure the electrical system for the pool, spa or fountain conforms with
all requirements of the National Electrical Code
and any applicable local codes or ordinances.
electrician must install the electrical system to meet or exceed all NEC requirements
®
Nicheless LED Light is installed.
IMPORTANT SAFETY PRECAUTIONS AND WARNINGS
WARNING
RISK OF ELECTRIC SHOCK OR ELECTROCUTION WHICH CAN LEAD TO
SERIOUS INJURY OR DEATH.
Except when the Halco ProLED
®
Nicheless LED Lights are installed in an area of the pool
or spa that is not used for swimming and the lens is adequately guarded to keep any person
from contacting it, the light shall be installed in or on a wall of the pool, with the
Before installing the Halco ProLED
®
Nicheless LED Light read and follow all safety precautions, warning
notices and instructions which are included in this Installation and Operation Guide. Failure to follow
safety precautions, warnings and instructions can result in severe injury or death, and damage to the Halco
ProLED
®
Nicheless LED Light.
Read Important Safety Precautions and Instructions. Before beginning any electrical wiring,
be sure to read and carefully follow ALL Safety Instructions. Installation of the
Halco ProLED
Nicheless Light
WARNING
®
Color-Changing Light RGB, Halco ProLED
®
Color-Changing Light RGB-W and
Halco ProLED
®
White Light
For supply connection, use only an isolating low voltage power supply with ungrounded output,
evaluated and listed by a NRTL for swimming pool use.
RISK OF ELECTRIC SHOCK OR ELECTROCUTION WHICH CAN LEAD TO
SERIOUS INJURY OR DEATH.
WARNING
INSTALLATION OF THE HALCO PROLED
®
NICHELESS LED LIGHT
Use the chart below to determine the appropriate minimum required pipe length for your
installation. It is recommended to use 1.5" pipe so that lights can easily be upgraded to a
higher wattage model in the future.
RGB / RGB-W / WHITE
WATTS
8 Watts
20 Watts
MINIMUM LENGTH
FOR 1.5” PIPE
6"
6"
All products listed above are available in 30, 50, 100 and 150 feet cord lengths.
NOTE
:
The Halco ProLED
®
Nicheless LED Lights are serviceable - do not attempt to remove
the enclosure of cord from the conduit while submerged. No separate ground or bonding wire is
required for the Halco ProLED
®
Nicheless LED Lights. These lights are low voltage and do not have
any exposed metal.
FOR YOUR SAFETY
pool serviceman in accordance with the National Electrical Code (NEC). Before installing this product, read and follow
all warning notices and instructions accompanying this product. Failure to follow warning notices and instructions may
result in property damage, personal injury, or death. Improper installation and/or operation will void the warranty. Always
disconnect the power to the light at the circuit breaker before installing or servicing the light. Failure to do so could result
in death or serious injury due to electrical shock.
all safety precautions, warning notices and instructions which are included in this Installation and Operation Guide. Failure
to follow safety precautions, warnings and instructions can result in severe injury or death, and damage to the lights.
RISK OF ELECTRIC SHOCK OR ELECTROCUTION.
WARNING
PREPARING THE LIGHT FIXTURE FOR INSTALLATION
NOTE:
A licensed electrician must complete the below preparatory steps prior to the
Verify the pool meets the requirements of the current National Electrical Code (NEC) / Canadian Electrical
the electrical system to meet or exceed those requirements prior to installing the Halco Pro
LED
®
Nicheless LED Lights. Examples of the NEC code requirements pool electrical systems must meet are
outlined below.
the inside of the bottom of the junction box or transformer) above the MAXIMUM water level, OR at least
Halco
ProLED
®
NOTE:
Always verify the pool’s electrical system meets all local city and state applicable requirements.
