Slide 65
Figure 7.3
7. Mechanical components
7.1 Squeegee
Height adjustment
The height adjustment (X) of the supporting rollers Fig. 7.4 has been set to 7 mm in the factory.
If striping still occurs despite optimum inclination adjustment, readjust the distance between the
supporting rollers and the lower edge of the sealing strip.
1.Place the machine on a level surface.
2.Lower squeegee. The sealing strips must now be resting vertically onto the floor.
3.Loosen nuts (figure 7.4 B) and adjust distance between supporting roller and ground
as per the table.
4.Tighten nuts.
Summary of Contents for Scrubmaster B260 R
Page 64: ...Slide 64 Figure 7 2a Figure 7 2b 7 Mechanical components 7 1 Squeegee...
Page 66: ...Slide 66 Figure 7 4 7 Mechanical components Height adjustment 7 1 Squeegee...
Page 100: ...180 130 170 150 120 Figure 9 5 Slide 100 9 Drive 9 2 4 Steering angle sensor...
Page 121: ...Slide 121 14 Notes...
