Slide 104
10.
Service messages
Service-Code
Description
Remedy
3.3.1.5.
SD-Card on the Display
Re format the SD-card with the diagnosis system, if error repeats,
replace the SD-card with a new one
3.3.6.2.
Group signal low power output overload
Overload of small cosumer outputs (e.g. buzzer, magnetic valve. Etc.)
3.4.1.1.
Malfunction drive control unit
Check wiring of the accelerator -B03 and direction switch;
Message is generated by the operator panel (-A02)
3.4.1.2.
Malfunction drive control unit front
see blinking code on drive control unit
3.4.1.4.
Malfunction drive control unit rear
see blinking code on drive control unit
3.4.5.1.
over temperature drive motor front
check the wiring of the drive motor thermo switch.
Is the machine used outside it´s specification?
3.4.5.2.
over temperature drive motor rear
(Option All-Wheel-Drive)
Check the wiring of the drive motor thermo switch.
Is the machine used outside it´s specification?
3.6.6.4.
Seat contact switch manipulation
See chapter 2.2.3.
Summary of Contents for Scrubmaster B260 R
Page 64: ...Slide 64 Figure 7 2a Figure 7 2b 7 Mechanical components 7 1 Squeegee...
Page 66: ...Slide 66 Figure 7 4 7 Mechanical components Height adjustment 7 1 Squeegee...
Page 100: ...180 130 170 150 120 Figure 9 5 Slide 100 9 Drive 9 2 4 Steering angle sensor...
Page 121: ...Slide 121 14 Notes...
