Fig. 10
1
1a
1a
1b
2
2
2
3
EN
EN-14
8.1 FILLING THE TANK
(Fig. 10
)
WARNING:
Only add clean mains water to the tank at
a temperature no greater than 50°C.
- Remove the hose (1) supplied, connect
one end (1a) to a tap and insert the other
end (1b) in the tank (2).
- Turn on the tap and fill the tank (2).
- Pour the liquid detergent into the tank.
N.B.:
Use non-foamy detergents only. For the
quantities, follow the instructions provided by
the detergent manufacturer according to the
type of dirt.
DANGER:
If the detergent comes in contact with the
eyes and/or skin or if swallowed, refer to
the use and safety information booklet
provided by the manufacturer of the de-
tergent;
- Once tank filling is complete, it is possible
to:
Insert the hose (1) into the tank (2) fully
where the end (1a) acts as a cap; or re-
move the hose (1) fully and insert the fil-
ter (3) supplied into the tank (2) opening.
