Page 32
PowerBoss
®
5.7 Scrub Head
1 Pedal for Scrub Head Lift
2 Scrub Head
3 Brush Ejectors
4 Defl ector Roller
5 Squeegee Blade
5.7.1 Cleaning Brushes
Clean scrub brushes (Fig.10/2) at daily intervals
or as required.
1. Use pedal (Fig. 10/1) to lift brush head.
2. Press brush ejectors (Fig. 10/3) down to
remove brushes for cleaning.
5.7.2 Changing Brushes
Check brushes for wear at weekly intervals.
Replace brushes if bristles are worn down to a
length of 1.5 cm.
1. Use pedal (Fig. 10/1) to lift scrub head.
2. Press brush ejectors (Fig. 10/3) down to
remove old brushes.
3. Push new brush under brush head and
use both hands to press install. Brushes
should seat into position.
5.7.3 Changing Defl ector Roller
Check defl ector roller (Fig. 10/4) at
weekly intervals and replace as required.
5.7.4 Changing Scrub Head Skirt
Check skirt (Fig. 10/5) at weekly
intervals. Change as required. Open
toggle-type fastener and remove skirt.
mounting skirt is in reverse order.
Fig.10
