Page 11
PowerBoss
®
Start moving machine
immediately after lowering
the scrub head,otherwise the
brushes may leave traces on
the fl oor. Lift squeegee before
changing to reverse. Lift up
brush head before passing
over dormers and more.
2.6 Stopping The Machine
Releasing the forward/reverse lever it
returns automatically into the neutral
position stopping the machine.
This also protects the machine against
unintentional movements or against
being inadvertently started.
2.7 After Work
1. Park machine on a suitable site for
maintenance.
2. Stop machine, lift squeegee and
scrub head and pull the ignition key.
3. Empty and clean dirty water recovery
tank.
Observe the legal directives
and local regulations for disposal
of detergents, see Water
Management Act.
4. Check clean water fi lter.
5. Check squeegee blades and suction
hose.
6. Check operation function and settings.
7. Charge batteries.
8. Clean the machine.
Empty the clean water solution tank before
shutting down the machine for a long
period of time.
Do not clean the electrical
parts by means of high-pressure
cleaning equipment.
2.8 Transport Mode
When transporting unit to; switch unit on,
lift squeegee and scrub head and actuate
the forward/reverse lever according to the
desired direction of travel and speed.
2.9 Tie Down Points
When transporting unit on a vehicle or
trailer,
the machine must be protected against
rolling off . Chock the drive wheel. Tie the
machine down fi rmly to the front with the
eye bolts (Fig. 2/1) and to the rear by the
chassis (Fig. 2/2) .
Fig.2
