Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
Operation Safety:
• Never
operate continuous a longer period with full load, or otherwise the product may be damaged or the
product life cycle reduced.
• Always
inspect if the remote control works normally before use - after use put the remote control in a clean
and dry environment.
• Always
inspect the rope, hooks and slings before operating with the product. Damaged components and
riggings must be replaced immediately. Protect all parts from damage.
• Never
use a product that is malfunctioning, has unusual performance or is damaged.
• Always
spool the wire rope onto the drum with the rope coming off the top in line with the fairlead opening.
Otherwise because of winding improperly, it will damage the steel wire rope. The service life of the wire rope
is closely related with service condition.
• Always
change in time when the wear quantities are higher and the fracture degree of wire rope exceed the
prescribed requirements
–
keep the changed wire rope to be the same model specification.
• Never
use a ceiling hook to hook the wire rope in order to prevent damages.
• Never hook the wire rope back onto itself. This will damage the wire rope. Always use a choker chain,
wire choker rope or a tree trunk protector.
• Always
before use, remove any element or obstacle that may interfere with safe product operation.
• Always
take time to use appropriate rigging techniques and that the strap or chain will not slip.
• Never
touch the wire rope or hook while in tension or under load.
• Always
be aware of stability of load during operation.
• Never
swing or twist loads.
• Never
leave suspended load unattended
– never leave the load hanging in the air for a longer time.
•
Never
spool out past length of the red painted rope, or the rope could come loose or spool in the opposite
direction.
• Never
touch the wire rope or hook while someone else is at the control switch or during operation.
•
Always
stand clear of the wire rope and load and keep others away while operating.
•
Always
stand to the side of the product during operation.
•
Always
ensure the hook travels in the same direction as directional switch indicates.
•
Always
unplug the power cord during rigging, when not in use, or during maintenance & cleaning.
•
Never
use the product to tow other vehicles. Shock loads can momentarily exceed capacity of the wire rope
& product.
• Never
use the product to secure a load during transport.
• Never
pull or hang a heavy item slanting when hoisting up, in order to avoid danger.
• Never
let a heavy load to hang in the air when not working, in order to prevent permanent deformation of
parts.
