Haklift Oy
Asessorinkatu 3-7
20780 Kaarina, Finland
Tel. +358 2 511 5511
www.haklift.com
Lifting Solutions Group
Axel Johnson International
2. Attachment of the battery
◼
Make sure the battery is attached correctly.
3. Polarity of the battery
◼
When the polarity of the battery is not correct, it may cause the trouble of the switch. Also, the reversal
of the rotating direction can cause a dangerous situation.
HOW TO CHARGE THE BATTERY
1. Insert the plug of the charger in the socket, and the charging indicating lamp will be flickered in green, red,
and yellow in turn within one second. And then, the battery charger will be in the standby position.
2. Insert the battery in the battery charger considering the polarity, and the charging will be started immediately.
3. When the battery working time is remarkably short despite full charging, the life of the battery may be over.
Replace the battery immediately.
CHARGING PROCESS
Use only the specified battery and battery charger.
Otherwise battery and charger can be damaged by fire,
explosion, charging error or overheat.
CHARGING TIME: Lithium battery
Voltage
DC 18V
Capacity (Ah)
3.0Ah
Time in mins
65
Note:
A new battery will work properly after five times of charging
and discharging. Charge and discharge the battery, which is not
used for a long time, for two to three times to function well.
Warning:
Take care not to short-circuit the terminal of the battery. The short-circuit
of the terminal may cause a fire or explosion doing a serious personal injury.
