Haklift HAVA2500V, Operation And Installation Manual, Page: 15 / 67

15
Selectable Parameters: 0 ---- total accumulative data for printing (default value)
1 ---- printing total accumulative data
F5 Maintenance and Service
F5.1 Key test
Instrument display
【 】
, press
『
Print
』
,
『
Zero
』
,
『
Tare
』
,
『 Gross 』 , 『 lb/kg 』 and 『 Total 』 in order, and the instrument displays 【 】 , 【 】 ,
【 】
,
【 】
,
【 】
and
【 】
, press
『
Hold
』
to quit key test.
F5.2 Display screen test
All strokes of meter display will have self-inspection, to observe whether there is lacks of strokes.
Press
『
Hold
』
or
『
Print
』
to quit test of display screen.
F5.3 Display current internal code
The display will show internal code of current instrument after smoothing. Press
『
Hold
』
or
『
Print
』
to quit the interface.
10.6 Function Description
● Weight maintenance function F2.1 = 1
Operation method
In normal weighing state, press
『
Hold
』
on the operation panel, the will instrument lock display
weight of the current scale, and “Hold” indication lamp is on. Only when weight setting value ≥
F2.2 is displayed, weight maintenance operation is effective. Otherwise, it will return to weighing
state after invalid operation information
【 】 is shown for a second.
If weight is in locked state, press
『
Hold
』
again to cancel locking of weight and return to normal
weighing state, and “Hold” indication lamp is off.
If it is in weight locking state, refuse to remove skin, clear skin and zero setting operation.
● Percentage display F2.1 = 2
Display specification
Display 【 】 , representing 20.5 %.
Pr = current actual weight / range ×100 %.
Press
『
Hold
』
to display switch in percentage and weight.
● Check weight and selection scale function F2.1 = 3
Function description
Set parameters such as F2.2 = A, F2.3 = B, F2.4 = C and F2.5 = D.
When display weight is X.
If X ≤ A, do not conduct check weight and selection.
If X
＜
(B – D), it lacks of weight, and the display flickers.
If (B – D) ≤ X ≤ (B – C), it is qualified and the display has normal display
If X
＞
(B – C), it is overweight and the display flickers.
Acquisition of target value
Press
『
Total
』
long until the display shows
【
TARGET
】
, and then press
『
Print
』
to show current target
value and flicker.