![background image](http://html1.mh-extra.com/html/hakko-electronics/v8-series/v8-series_operation-manual_3316189397.webp)
6.6 Transfer Procedure (Using a Modem)
6-49
6
T
ransfer with
V8
6.6
Transfer Procedure (Using a Modem)
With modems, it is possible to transfer screen data to the V series in a remote place.
Preliminaries
Receive (V series) side
• Modem (Accessories: RS-232C cable, modular cable, AC adaptor)
• V-CP
• RS-232C cross cable (page 6-53)
• V-SFT or communication software (HyperTerminal, etc.)
Send (computer) side
• Modem (Accessories: RS-232C cable, modular cable, AC adaptor)
• V-SFT
Setting Procedure
Receive (V series) side
1.
Connect the modem on the receive (V series) side to a computer according to the instruction
manual.
2.
Transfer AT commands to the modem.
3.
Disconnect the modem from the computer, and connect the modem to the V series. (Refer to
page 6-53.)
4.
Set a baud rate used between the V series and the modem. (Refer to page 6-52.)
Send (computer) side
1.
Connect the modem on the send (computer) side to a computer according to the instruction
manual.
2.
Start up V-SFT. Transfer AT commands to the modem. (Refer to page 6-50.)
3.
Make settings for communications between the computer and the modem. (Refer to page 6-54.)
4.
Transfer the V-series screen data. (* On-line editing is not allowed.)
V series
Telephone
line
Computer
Modem
Modem
Summary of Contents for V8 series
