![background image](http://html1.mh-extra.com/html/hakko-electronics/fu-600/fu-600_instruction-manual_3335023011.webp)
Changing the preset temperature
You can change the preset temperature. (0 to 5)
Example
:
400 to 410℃ at preset No.3
1. Press and hold the button for at least one second.
Both preset number display and setting display will begin to flash.
2. Press the button three times to change the preset number display to .
3. Press the button to set the value.
4. Use the method for setting the temperature to enter and set the preset temperature.
10
13
Selecting the preset number
You can call up the preset temperature by pressing the buttons.
Initial preset temperature is 0
:
300℃, 1
:
350℃, 2
:
375℃, 3
:
400℃, 4
:
450℃ and 5
:
500℃.
Example
:
preset number1 (350℃) to No.3 (400℃)
1. Press the button once.
Preset number display will begin to flash.
2. Press the button twice to cahnge the preset number display to .
3. Press the to set the value.
Press and hold the button
for at least one second.
Press the button
three times.
Press the button once.
●
05
:
S-E, C-E buzzer sound setting
In the buzzer setting mode, which sets whether to sound the buzzer when a sensor error or
soldering iron error occurs, either or is displayed.
:
The buzzer does not sound when error occurs.
:
The buzzer sounds when error occurs.
●
06
:
Set temperature achieving alert setting
In the set temperature alert setting mode, either or is displayed.
:
The buzzer does not sound when the soldering iron reaches the set temperature.
:
The buzzer sounds when the soldering iron reaches the set temperature.
●
14
:
Password lock setting
It is possible to restrict certain setting change to the unit.
・
Moving to the parameter setting mode
・
Changing the set temperature
・
Changing the preset number
・
Changing the offset value
There are three choices for the password lock setting.
※The move to parameter setting requires you to enter the password in either Partial or Restricted.
: Open
You can make changes without entering a password.
: Partial
You can choose whether or not password is needed to make changes.
Password not required
Password required
Set temperature
Preset No.
Offset value
: Restricted
A password is required to make any changes.
Press the button
once.
Press the button
twice.
Press the button
once.
Press the button once.
Press the button once.
Press the button once.
Press the button once.