![background image](http://html1.mh-extra.com/html/hakko-electronics/fn-1201/fn-1201_instruction-manual_3286775010.webp)
8
7. OPERATION (continued)
7-2 Basic operation
7-2-1 Startup
1.
Check that all connections in "
5. INITIAL SETUP
" have been performed and then switch on the
POWER switch of the connection box and switch on the PC.
2.
Check that the blinking interval of the green LED on the connection box has changed from 0.3
seconds to 2 seconds.
7-2-2 Starting the application
1.
Start the application.
2.
Input the IP address set in "
7-1 Network settings
", click
[Connect]
, and after checking that the
display has changed to "Connected", click
[Start]
.
3.
For information on using the application, refer to the instruction manual included with the
application.
7-3 Controlling the connection box (file operations by HTTP methods)
The connection box operates as a file server, and file operations can be used to obtain information and
settings from connected equipment, change equipment settings, and control equipment operations.
Use the HTTP "GET" method to obtain files and the "POST" method to send files.
●The files which can be handled by the connection box are as follows:
system_inf.txt
(GET only)
Connection box software version number, list of interface cards connected
to the connection box, list of equipment that can be connected to
net_config.txt
Network settings
ifx_stat.txt
Status of equipment connected to interface card x
ifx_setting.txt
List of settings (set temperature, offsets, etc.) of equipment connected to
interface card x
ifx_sysparam.txt
List of system settings (sleep, shutoff, etc.) of equipment connected to
interface card x
ifx_log.txt
List of time-linked measurement results (sensor temperature, heater drive
time, etc.) of equipment connected to interface card x
ifx_value.txt
(GET only)
List of measurement results not linked to time (automatic calibration results,
temperature measurement results, etc.) of equipment connected to interface
card x
ifx_profile.txt
Profile data of equipment connected to interface card x
ifx_program.txt
Program data of equipment connected to interface card x
mac_addr.txt
(GET only)
MAC address and status
time_date.txt
Time/date information of connection box
For information on the connection box control commands and each file, refer to the "FN1201 Command
Reference".