6
l
Control card and
changing the tempera-
ture setting
Please refer to the HAKKO FM-203 or
FM-206 Instruction manual.
l
Replacing the tip
Removing and inserting the tip:
Removing the tip:
Hold the handle and pull the tip out of the
handpiece with the heat resistant pad.
Inserting the tip:
Before inserting the tip; Insert the Tip ID
number key into the process gate until the
buzzer sounds once.
Hold head part and insert the tip into the
handpiece. Push until the tip stops.
Hold this part to insert into the handpiece.
24V-140W
FM-2023
Hold the handpiece at the front to remove tip.
24V-140W
FM-2023
CAUTION:
The tip can be very HOT. Use the heat resis-
tant pad for handling hot tips, but do not hold
the hot portion of the tip, even with the pad,
for longer than necessary.
