Hakko Electronics FM-2023, Instruction Manual

Page: 27 / 36

Warnings, cautions and notes are placed at critical points in this manual to
direct the operator’s attention to significant items. They are defined as follows:
WARNING: Failure to comply with a WARNING may result in injury or death.
CAUTION: Failure to comply with a CAUTION may result in injury to the opera-
tor, or damage to the items involved. (One example is given below.)
NOTE: A NOTE indicates a procedure or point that is important to the process being
described.
CAUTION
When the power is on, the tip temperature is between 200°C and 400°C.
Since mishandling may lead to burns or fire, be sure to comply with the following
precautions:
l
Do not touch the metallic parts near the tip.
l
Do not use the product near flammable items.
l
Advise other people in the work area that the unit can reach a very high tem-
perature and should be considered potentially dangerous.
l
Turn off the power while taking breaks and when finished using the unit.
l
Before replacing parts or storing the unit, turn off the power and allow the unit
to cool to room temperature.
CAUTION
To prevent damage to the unit and ensure a safe working environment, be sure
to comply with the following precautions:
l
Do not use the unit for applications other than those specifically described in
the instruction manual.
l
Do not set the tip temperature higher than 400°C.
l
Do not rap the MODEL FM-2023 against the work bench to shake off residual
solder, or otherwise subject the iron to severe shocks.
l
Do not modify the unit.
l
Use only genuine HAKKO replacement parts.
l
Do not wet the unit or use the unit when your hands are wet.
l
The operating process will produce smoke. Make sure the area is well venti-
lated.
l
Pull on the plug to disconnect the MODEL FM-2023 from the station outlet. Do
not pull the cord.
中 文
English
日本文
26
3. WARNINGS, CAUTIONS AND NOTES