Instruction Manual
IRON RECEPTACLE
Assembly
CAUTION
Attach the product ensuring that it does not detach during use.
B5265
(1) Loosen the truss head screws on both ends of the iron
receptacle and remove the iron receptacle.
(2) Align the grooves of the new iron receptacle with the
holder for iron receptacle and install the new iron
receptacle in the reverse procedure for the removal of
the iron receptacle.
Truss head screws
Holder for
iron receptacle
Groove
(1)
(2)
B5266 / B5267
(1) Push the iron receptacle upward and remove.
Note
If the iron receptacle is difficult to remove, use a tool to remove it.
(2) Loosen the screws of the new iron receptacle, align the grooves to the iron holder, and insert the iron receptacle.
Insert a screwdriver from the bottom of the iron holder and tighten the screw to fix.
Insert from
the bottom.
Loosen the pan
head screw.
Align the grooves
on the outer side of
the iron receptacle
with the iron holder.
For FH-801
This product is an iron receptacle for the C5056 to C5059 tube units.
使用手冊
IRON RECEPTACLE
組裝
注意事項
請妥善安裝本產品確保使用中不會脫落。
B5265
(1)
鬆開焊鐵插座兩端的半圓頭螺絲並拆下焊鐵插座。
(2)
將新焊鐵插座的槽溝對齊焊鐵插座支架,並依照拆下焊
鐵插座的逆向步驟裝上新的焊鐵插座。
半圓頭螺絲
焊鐵插座支架
槽溝
(1)
(2)
B5266 / B5267
(1)
將焊鐵插座往上推並將其拆下。
注
記
如果焊鐵插座難以拆下,請使用工具。
(2)
鬆開新焊鐵插座的螺絲,將槽溝對齊焊鐵架並將焊鐵插座插入。
將螺絲起子插入焊鐵架底部並擰緊螺絲。
從底部插入。
鬆開盤
頭螺絲。
將焊鐵插座外側的
槽溝對齊焊鐵架。
FH-801
專用
本產品為 C5056 至 C5059 出錫管裝置專用之焊鐵插座。
日本白光牌