![background image](http://html1.mh-extra.com/html/hakko-electronics/472d/472d_instruction-manual_579896003.webp)
WARNINGS, CAUTIONS, NOTES AND EXAMPLES
Warnings, cautions and notes are placed at critical points in this manual to direct the
operator’s attention to significant items. They are defined as follows:
WARNING:
Misuse may potentially cause death of, or serious injury to the user.
CAUTION:
Misuse may potentially cause injury to the user or physical damage
to the objects involved.
For your own safety, be sure to comply with these precautions.
NOTE:
A NOTE indicates a procedure or point that is important to the process being
described.
EXAMPLE:
An EXAMPLE is give to demonstrate a particular procedure, point or
process.
CAUTION
Remove the pump securing screws (M4
×
25 marked red) from the bottom of the station.
Failure to do so may result in serious problems.
Be sure to save this screw.
When the power is on, the nozzle temperature will be between 350
°
C/662
°
F and 450
°
C/
842
°
F.
Since mishandling may lead to burns or fire, be sure to comply with the following
precautions.
●
Do not touch the metallic parts near the nozzle, nearby plastic parts and the iron
holder .
●
Do not use the product near flammable items.
●
Advise other people in the work area that the unit can reach a very high temperature
and should be considered potentially dangerous.
●
Turn the power off when no longer using the Hakko 472D or leaving it unattended.
●
Before replacing parts or storing the unit, turn the power off and allow the unit to cool
to room temperature.
To prevent accidents and failures, be sure to take the following precautions:
●
Do not use the unit for applications other than desoldering.
●
Do not rap the desoldering iron against the work bench to shake off residual solder, or
otherwise subject the iron to severe shocks.
●
Do not modify the unit.
●
Use only genuine Hakko replacement parts.
●
Do not wet the unit or use the unit with wet hands.
●
Set the ceramic paper filter (S) for the filter retainer (station), and the ceramic paper
filter (L) for the filter pipe (Iron).
●
Maintain the desoldering gun and the station.
●
While using the unit, don’t do anything which may cause bodily harm or physical
damage.
2