27
MATERIALS
CONVENIENT FUNCTION OF HAP CONTROLLER
CONTINUE
・Push "
key" one time in "
" mode.
蛯
It changes for present value display to "
"
and for set value display to "
". It goes to set
mode of kinds of warning of temperature control
irregularity 2.
・Set value to "
" with pushing "mode change key" and
after having "
" go on and off and pushing "
key" then
fix with pushing "mode change key".
蛯
It is set that warning of variation upper limit is
as type of warning of temperature control irregu-
larity 2.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
"5": variation upper
limit warning.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
warning of temperature
control irregularity 2.
type : correspond to in
put of thermocouples
for control.
" 0 ":without warning
3. Variation upper limit warning is as set of warning of thermocouples wired with
thermocouples-2 in put.
・ Push "
key" one time in "
" mode.
蛯
It changes for present value display to "
"
and for set value display to "
". It goes to set
mode of temperature control irregularity 1.
・Set value to "
" with pushing "mode change key" and
after having "
" been going on and off and pushing "
key" then fix with pushing "mode change key".
蛯
It has been set for temperature control irregular-
ity 1 not to indicate irregularity in reaching at
temperature for working.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
alter setting value
non indication with
"oFF"
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
indication of temperature
control irregularity 1.
setting : corresponding
with thermocouples at
outlet of device.
indication with "on"
4. Altering set for indication of temperature control irregularity 1. It is set for ther-
mocouples assembled in outlet of device not to indicate irregularity in reaching
at temperature for working.
・ Push "
key" three times in "
" mode.
蛯
It changes for present value display to "
"
and for set value display to "
". It goes to set
mode of latch of temperature control irregularity
1.
・Set value to "
" with pushing "mode change key" and
after having "
" been going on and off and pushing "
key". Then fix with pushing "mode change key"
蛯
After releasing latch of temperature control
irregularity 1, it is set for temperature control
irregularity 1 with thermocouples at outlet to re-
put on heater with releasing irregularity.
・ Push "mode change key" for 2 seconds long time.
蛯
It changes to operation mode.
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
"oFF" : without holding
℃
時.分
Hz
℃
熱風温度（PV）
温度設定（SV）/周波数/時間
latch setting of temperature
control irregularity 1 : corre-
sponding with thermocou-
ples at outlet of device.
"on" : self holding
5. After altering set (latch: self holding) of temperature control irregularity 1, set
re-put on heater with releasing irregularity.
