Spinney House, Wilcox Close, Aylesham, Kent. CT3 3EP. Telephone: +44 (0) 1227 711072
Registered in England No. 07254120
•
VAT No. GB 992 7373 70
General Qualifications
These General Qualifications are applicable to all HAKI products and must always
be read in conjunction with each products Technical Documentation (TD).
General
•
Always check general product condition before use
•
If in doubt always ask by contacting a representative of HAKI
•
Reject any damaged or rusty components
•
HAKI products and systems provide temporary protection during construction activity.
•
HAKI products are NOT
tested or intended:
- to withstand impact by any vehicle,
- to support or provide control of the public,
- for the containment of bulk materials.
Always Plan your works
•
Take note of location, proximity to permanent and temporary hazard structures.
•
Take note of dimensions, layout and access areas.
•
Always identify both the fall hazard for the installer and the falling materials hazard for persons
and property below.
•
These identified hazards should also be considered on dismantling.
•
HAKI strongly recommends seeking competent Work at Height advice if in any doubt about the
installer’s or other’s safety.
•
Note the component weight as given on the TD sheets and ensure suitable handling equipment
is available.
•
Ensure local site Risk Assessment / Method Statement detail is observed and followed.
