hajdu Smiley SY120R, Instructions For Installation And Use Manual, Page: 44 / 132

2
�� p�� ��� �� 2017 be�� � s�b���
2017. szeptember 7. 14:22:21 �� p�� ��� �� 2017 be�� � s�b���
2017. szeptember 7. 14:22:21
3
�� p�� ��� �� 2017 be�� � s�b���
2017. szeptember 7. 14:22:21 �� p�� ��� �� 2017 be�� � s�b���
2017. szeptember 7. 14:22:21
44
SY80R • SY120R • SY150R
9.5.12. StAt (statistical data, counters)
If you press and hold down the middle button, the value
S-00 will appear on the display indicating the statistical
data number 0 . By touching the right or left arrow, you
can navigate among the serial numbers of the data, and
by shortly touching the middle button, you can display
their data contents . In all cases, the contents of each reg-
ister is a numerical value from -999 to 9999, which can-
not be modified. By repeatedly touching the middle
button shortly, you can return to the serial number in the data register . You can
return to the StAt menu item by pressing and holding down the middle button.
The serial number and function of each statistical register is shown in the table
below:
00 Remaining days from service period
01 Remaining minutes from service period
02 Time elapsed since last Legionella disinfection [days]
03 Time elapsed since last Legionella disinfection [minutes]
04 Time remaining until next switch-over to ECO mode [days]
05 Time remaining until next switch-over to ECO mode [minutes]
06 Total operating time [days]
07 Total operating time [minutes]
08 Total operating time from mains power supply [days]
09 Total operating time from mains power supply [minutes]
10 Total heated operating time in lower [days]
11 Total heated operating time in lower [minutes]
12 Total heated operating time in upper [days]
13 Total heated operating time in upper [minutes]
14 Number of battery charging cycles started
15 Number of battery charging cycles completed
16 Number of switchings to mains power supply [thousands]
17 Number of switchings to mains power supply
18 Total switching in lower [thousand]
19 Total switching in lower
20 Total switching in upper [thousand]
21 Total switching in upper
22 Maximum measured upper temperature
23 Maximum measured lower temperature
24 Minimum measured upper temperature
25 Minimum measured lower temperature
26 Program version number
9.6. Lighting test
Lighting test function: if you simultaneously touch both
buttons on the sides, all LEDs and display items will light
up for four seconds.