HairMax PowerFlex Laser202, User Manual

Page: 13 / 28

11
GETTING ST
AR
TED | CHARGING
GETTING STARTED | CHARGING
Getting Started
Read this user manual completely before you start to use
your device. The instructions in this user manual are intended
for individuals with a minimum of an eighth grade education.
HairMax Laser Devices are safe for home use.
The patient is the intended operator of this equipment.
When you receive your device, take all the parts out of the case.
Make sure your device is clean and dry before beginning the
treatment.
Charging
Charge your HairMax Laser Device by plugging
the small end of the black Power Cord
into the socket on the bottom of the
Controller/Battery Pack (Figure A).
Plug the other end of the Power Cord
into the USB socket of the Power Supply
(Figure B). Plug the Power Supply into an
electrical wall outlet.
The indicator lights on the side of the
Controller/Battery Pack will flash during
the charging process. Four steady blue
Indicator Lights indicate your device is fully
charged (Figure C).
When your HairMax Laser Device is
turned on, the indicator lights will illuminate to
display the battery level. As the battery charge
diminishes, the Indicator Lights will turn off
in a sequence to indicate the remaining charge
level of the battery:
4 lights
= full
3 lights
= 75%
2 lights
= 50% (time to recharge)
1 light
= 25%
08
A
B
C
Controller/Battery Pack
Controller/Battery Pack
Side View
Your HairMax Laser Device comes with
a rechargeable Controller/Battery Pack.
You must charge the
Controller/Battery Pack for
6-8 hours before initial use.
ONLY UTILIZE THE PROVIDED CONTROLLER/BATTERY PACK
WITH YOUR HAIRMAX LASER DEVICE. PLUGGING INTO ANY
OTHER POWER SOURCE MAY DAMAGE THE DEVICE AND
VOID YOUR WARRANTY.