HairMax PowerFlex Laser202, User Manual

Page: 24 / 28

22
ELECTROMAGNETIC IMMUNITY GUIDANCE
ELECTROMAGNETIC DISTANCE RECOMMENDATIONS
Recommended separation distances between portable and mobile RF communications equipment and the
EQUIPMENT or SYSTEM for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
The HairMax Laser Device is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the
HairMax Laser Device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and the HairMax Laser Device as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
(W)
Separation distance according to frequency of transmitter
(m)
150 kHz to 80 MHz
outside ISM and amateur radio bands
150 kHz to 80 MHz
outside ISM and amateur radio bands
80 MHz to 800 MHz 800 MHz to 2.7 GHz
0.01 0.12 0.20 0.035 0.07
0.1 0.38 0.63 0.11 0.22
1 1.2 2.0 0.35 0.70
10 3.8 6.32 1.10 2.21
100 12 20.00 35 70
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation
applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
d = [–––] P
3.5
V
1
d = [–––] P
12
V
2
d = [–––] P
3.5
E
1
80 MHz to 800 MHz
d = [–––] P
7
E
1
80 MHz to 2,7 GHz
d = [–––] P
3.5
V
1
d = [–––] P
12
V
2
d = [–––] P
3.5
E
1
80 MHz to 800 MHz
d = [–––] P
7
E
1
80 MHz to 2,7 GHz
d = [–––] P
3.5
V
1
d = [–––] P
12
V
2
d = [–––] P
3.5
E
1
80 MHz to 800 MHz
d = [–––] P
7
E
1
80 MHz to 2,7 GHz
d = [–––] P
3.5
V
1
d = [–––] P
12
V
2
d = [–––] P
3.5
E
1
80 MHz to 800 MHz
d = [–––] P
7
E
1
80 MHz to 2,7 GHz