EN
24
3.
USE
3.1.
CHARGING THE BATTERY
It is essential to charge the battery for about 2 hours before using the
clippers for the first time. Charge the clippers at least once during the year
following the date of delivery. The battery reaches its full capacity after 3
or 4 charging cycles.
The equipment must only be used with the
power pack it was supplied with.
Use only with the
HP12D-0502000-AE power
pack.
WARNING: To recharge the battery, use
only the removable power pack supplied
with the equipment.
When charging, it is advisable to switch the clippers off (On/Off button set
to 0, Fig. 1-B).
3.1.1.
Charging the clippers from the mains supply
Insert the electrical lead into the socket of the clippers (Fig. 2a).
Connect the power pack (Fig. 1-L) to a mains power socket.
During charging, the indicator light flashes.
At the end of charging, the indicator light comes on steadily. Unplug the power
pack. The clippers can then be used without the electrical lead.
