18
U
SING THE COMB ATTACHMENTS
▪
The clippers must be switched off. Select a comb attachment: 3, 6, 9 or 12 mm
(Fig. 1, Ref. G-J).
▪
Fit the comb attachment (Fig. 3): hold the comb attachment by its sides and clip
it into the slots. When the comb attachment is correctly fixed, it is immobilized.
▪
To remove the comb attachment: hold it by its sides and pull it back.
R
EPLACING THE BLADE
Other blades are available as an option, please contact your dealer.
▪
Unclip the removable blade (Fig. 4).
▪
Fit the new blade so that the slots in the blade fit onto the stop pins.
▪
Clip the blade back on.
SERVICING
R
OUTINE SERVICING
▪
After using the clippers each time, clean the cutters with the brush supplied
(Fig. 5a).
▪
If necessary, clean the body of the clippers with a cloth slightly moistened with
water or mild liquid soap. Never use abrasive products or solvents.
▪
Clean the blade with an antibacterial spray. We recommend the STERIL CLEANER
920- cleaning, lubricating and disinfecting product.
▪
Lubricate the cutters at least once a day, taking care to deposit a drop of oil on
the points shown (Fig. 2).
▪
After lubricating, run the clippers for a few seconds.
C
LEANING THE BLADE
In the case of intensive use, clean the blade at least once a day.
▪
Remove the blade as described in § 3.3.
▪
Clean the inside of the blade with the brush supplied (Fig. 5b).
▪
Put the blade back on the clippers as described in § 3.3.
Summary of Contents for Shark TH11
Page 2: ...2 Fig 1...
