TESTit
Measurement
Order h49 7144.907-333
101
9.5 Speed/force diagram
Under »Speed/force diagram«:
A new centrifugal force curve cab be created
Several centrifugal force curves can be compared
In the centrifugal force curve, the measured force values [y-
axis] are recorded versus the associated speed values [x-
axis].
9.5.1 Selecting a clamping device
If a clamping device is already selected on the »Measure«
page, it will be used for the measurement of a centrifugal
force curve.
If no clamping device has been selected, or if you wish to
select a different clamping device, the following steps are
necessary.
=
1. Click the »Select clamping device« button.
