Hainbuch ms dock, Operating Instructions Manual

Page: 58 / 72

ms dock
Maintenance
58 Order h49 7144.907-333
11 Maintenance
11.1 Maintenance safety
WARNING
Serious injuries caused by parts being ejected
centrifugally after a loss of clamping power!

Maintain the maintenance and cleaning intervals
of the product at all times.

It is essential to check the maintenance status of
the product at regular intervals with a structural
clamping force measurement.
CAUTION
Health risks caused by incorrect handling of
cleaning agents!

Pay attention to hazard specifications and the
safety data sheet of the manufacturer.
INFORMATION
If necessary, use any forcing / extraction threads in
the components of the product, changing parts or
clamping elements.
11.2 Maintenance schedule
The following sections describe the maintenance work
needed to ensure optimum and fault-free operation.
If increased levels of wear are detected during regular
checks, shorten the maintenance intervals to reflect the ac-
tual rate at which signs of wear appear.
Contact the manufacturer for questions relating to mainte-
nance work and maintenance intervals [see »Contact« chap-
ter].
Interval Maintenance work
daily
Visual inspection of wear locations, nicks and cracks [see »Vis-
ual inspection« chapter]
Complete cleaning if heavily soiled [see »Cleaning« chapter]
weekly or after 40- operat-
ing hours*
Lubricate the product [see »Lubricating the product« chapter]
six-monthly or after 1500
operating hours*
Completely clean the product [see »Cleaning« chapter]
Lubricate the product [see »Lubricating the product« chapter]
with storage See »Storage« chapter
* depending upon which stipulation is achieved first
Table 6: Maintenance table