Hainbuch ms dock, Operating Instructions Manual, Page: 26 / 72

ms dock
Use
26 Order h49 7144.907-333
5 Use
The product is there solely to support HAINBUCH clamping
devices on chip-cutting machine tools.
The product can only be used in conjunction with a suitable
clamping device from HAINBUCH.
The product must only be actuated using the original actu-
ation key.
As well as for its general field of application, this product
was designed and developed for use, when necessary, in a
specific and documented application [see clamping situa-
tion drawing or order confirmation].
Any other fields of application require the explicit approval
of the manufacturer.