mandoteX – Maintenance
NOTE!
In the product screws can be installed which
are secured with sealing wax.
The screws secured with sealing wax must
not be opened.
NOTE!
Damage of seals and clamping elements
[e.g. clamping head, segmented clamping
bushing].
Seals ans clamping elements may be dama-
ged due to us of wrong solvents.
Do not use any solvents that contain ester or
polar solvents for cleaning the clamping devi-
ce.
8.2 Cleaning
3. x
NOTE!
Material damage if cleaned with compres-
sed air!
Cleaning the clamping device with compressed
air can force metal chips into thread and groo-
ves. This can damage or even destroy the
clamping device.
Never clean the clamping device with com-
pressed air!
Special tools required:
Ester-free, non-polar cleaning agent
Soft, lint-free cloth
Fig. 32
1. Disassemble the clamping device [see section »Di-
sassembling the clamping device«].
2. Clean all the components listed below with clea-
ning agent and a cloth; remove all oil and grease
residues:
flange
clamping unit / segmented clamping bushing
cone of the segmented mandrel
reception and inner thread for the clamping unit
in the segmented mandrel
workpiece end-stop [option]
cylindrical screws
52
Order h49 7144.907-333